Preventing Crane Accidents

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

by Creative Safety Supply

Crane accidents can be catastrophic, but they can also be prevented. From initial training to pre-operation inspections, employers are responsible for implementing preventive measures and arming employees with the knowledge and equipment they need to stay safe on the job. It is important to first understand the kind of crane that is being operated, this might have an effect on the hazards taken into account. The employer can then go on to conduct training sessions, purchase personal protective equipment (PPE), and post crane safety signs.

Common Crane Hazards

Crane operators, and those working around them, should be taught what the most common crane hazards are. Being aware of these risks will help ensure that everyone is watching out for them, and taking steps to avoid them whenever possible. The following are some of the hazards that all crane safety plans should take into account because of how frequently they can occur, and how serious they can be:

  • Electrical Hazards - Cranes operate at great heights, which puts them in a terrible position for accidently hitting electrical lines. The metal in the crane is an excellent conductor, and can cause fatal electrocution. Crane operators must be aware of where every electrical line is at all times.
  • Materials Falling - Every load that a crane lifts needs to be properly secured. But even when the loads are secured, there is always a risk of something falling off. Those below the crane should avoid working in the area, and wear hard hats and other appropriate PPE when it is unavoidable.
  • Overloading a Crane - Cranes can lift an astounding amount of weight, but there are limits. Crane operators, and those that load cranes, need to know precisely how much weight it can handle, and exactly how much weight they have added at any given time. Overloading a crane can cause it to tip over, or to drop the load, which can have devastating consequences.
  • Crane Movement (pinch points) - Cranes often need to twist or move to get the load where it needs to go. This can create pinch or crush points where someone could be seriously injured.
  • Dropped Loads - If a crane drops its load, whatever is under it will be crushed. Even vehicles or structures can be crushed from the impact of a heavy load dropped from a significant height. Nobody should work directly under a crane load for any reason, even with PPE.

Crane Hand Signals

Those operating a crane, truck, or crawler are likely to be working in a noisy area, wearing ear muffs, and may have their line of vision obstructed, meaning clear communication can be difficult. When moving loads, crane operators should use the established code of hand signals with the help of a signaler to ensure messages are being relayed and the operator avoids potential hazards.

Both the operator and the signaler must be trained thoroughly to understand and interpret hand signals. The “stop” and “emergency stop” are arguably two of the most important signals used and crane operators must know to always stop operating and obey stop signals. There is typically only one designated signaler at a time (in an effort to reduce confusion) and all signalers must be deemed qualified to give crane hand signals. The signaler must be in clear view of the operator, have a clear view of the load, and instruct safe material handling for the operator. It is also their duty to keep pedestrians from the dangerous area. 

Safety for Different Types of Cranes

There are several different types of cranes used in industries today, and each of them will have a different set of hazards that need to be accounted for. Understanding what type of crane is used in a given area, and how to improve safety for that specific type, is a critical component of an overall crane safety plan. Some of the most common types of cranes are:

  • Tower Crane - Tower cranes can reach very high heights (265+ feet) and are commonly used in construction of skyscrapers or other buildings. These cranes can be secured at the ground, or attached to the top of a structure to aid in its completion.
  • Gantry Crane - A gantry crane is fixed in one spot and gets support from the structure it is fixed to. These cranes are common in places like trainyards, shipyards, and factories.
  • Rough Terrain Crane - Cranes equipped with treads rather than tires are important for construction sites with unpaved or otherwise rough terrain. It is critical to ensure the crane is secured safely before loading it to avoid accidents.
  • Aerial Crane - An aerial crane, or sky crane, is attached to a helicopter. The wind caused by the helicopter makes securing loads properly especially important.
  • Floating Cranes - Cranes that are based on a ship or platform in the water are known as floating cranes. In some cases, these cranes can be unstable due to waves, which must be taken into account when planning for their use.
  • Vehicle Mounted Cranes - A crane can be mounted on a vehicle to make it more mobile for easier use. In most cases, the vehicle will be a large truck equipped with heavy outriggers to stabilize the crane while it is in use.

Crane Inspection List

Making sure that a crane is in proper working order before it is used is essential. If anything isn't working right, it can cause serious accidents and injuries to those in the area. All crane safety plans should include a crane inspection list that the operator (or other designated individual) will need to go through before operating the crane.

The exact details of a crane inspection list will vary somewhat based on the type of crane and other information, but in general each list should have the following categories covered:

  • Hook - This category will check things like the opening of the hook, checking for cracks or corrosion, how much wear is on the throat, and other details.
  • Wedge Sockets - Looking at the wire rope size, the dead end of a wire rope, and ensuring the wire rope is properly secured.
  • Sheaves - Check to ensure the wire rope is seated into the sheaves, that the keepers are in good working order, the bolts are tightened correctly, and for any signs of damage or wear.
  • Boom - Look for hydraulic leaks, watch for lattice extension issues, and check all around the boom for bent, buckled, or cracked panels.
  • Fluids - Checking all the fluids in the crane to ensure they are at the necessary levels.
  • Tires - Tires must be inflated to the required levels, and should not have any cuts, bulges, or signs of wear past the normal expected life of the tire.
  • Other - Any other things that need to be checked on a given crane before it is operated.

A crane inspection list can either be printed off on paper, or a digital version. Someone should actually check off each section of the list signifying that they have been checked before the crane is put into use on the jobsite.